What You Need To Consider When Purchasing Scuba Products

July 22, 2011
by Samantha Sterling Xavier

If you are new to scuba diving, you need to learn a couple of things about this type of equipment before investing any of your money. Patience is definitely a virtue when it comes to spending money on this type of equipment. This warning is only for those that are impulse buyers; if you know what you need, go get it right now. A primary example of comprehending a very important piece of diving equipment is knowing which diving fins to get for the dive you will be on. A comparison would be cave diving opposed to open water diving; each type of dive requires a different size format of the fin itself. Let\’s say that you\’re going underwater to do photography; the things that you need must allow you to turn on a dime and stop very quickly. It is important that the equipment that you own or rent is helpful and reflective of the type of dive you will be doing.

There are two basic types of equipment configurations involved with scuba diving. Equipment that you need, based upon the two possible configurations, has to do with why you were diving and what conditions are under the water.

Recreational divers have a particular configuration that they call the open circuit set up. The closed-circuit, or semi-closed circuit, is often called a rebreather configuration. Closed circuits were the initial type which were later replaced, or at least used more, by open circuits. Breathing back into the mouthpiece will actually reconvert CO2 mixture into breathable air using this closed circuit technology.

Technical diving is a fascinating area of scuba diving, and it is really not for rank beginners in our opinion. Varying scuba equipment needed for this are many cylinders that contain certain gases. A gas called Trimex for instance is to be used only at the deeper depths. Also, a cylinder of pure oxygen can be carried and used during ascent at decompression stops. Having excess cylinders can obviously give you particular problems for attaining buoyancy properly. For this reason you will witness technical divers dressed in high capacity buoyancy compensator (BC).

Technical divers will often be found diving to greater depths than most care to go. The deeper you go, obviously, the more dangerous it can be and it will require special equipment. Part of their additional regimen is to have special fixtures in their oxygen tanks, along with redundant systems to provide emergency backup just in case. An example of this is what is called a pony cylinder. These products are actually self-contained, having demand regulators and mouthpieces of their own. If your scuba set goes down, and you have this back up with you, it can help get you back to the surface without damage or injury. There is so much more to discuss and consider with the subject of scuba equipment. You can get a lot of pointers from trusted sites such as PADI and your diving instructor if you are just learning. Making a decision about where your diving location will be is the best starting point. A lot of what will be required depends on the way the water is so this needs to be a priority.

One thing many individuals don\’t consider when beginning the superb activity of diving is how large of a car or truck you\’re going to need to carry all of your stuff around. Especially if you have a huge family or team. The easy solution is to get a huge passenger van or SUV to make certain all your deep-sea diving needs are met.

About the Author:

Leave a Reply